ISGC-T series Hybrid solar inverter
ISGC-T series
Hybrid solar inverter control all-in-one machine, built-in MPPT controller, supports battery free operation, can parallel up to 9 devices to achieve higher power output, suitable for sensitive electronic devices such as power tools, computers, audio/video components, etc. It is very suitable for household, commercial, industrial and other scenarios.- Sine Wave Output
- Built in MPPT control, maximum photovoltaic input 450V
- Built in AC charger, maximum charging current can reach 80A
- Supports up to 9 parallel devices
- Can communicate with lithium iron phosphate batteries (RSPB series)
- Support external WIFI module
Hybrid solar inverter Detail
| Model | ISGC + T3024 | ISGC + T5048 | ISGC + T5048 | |
| Parallel Connect Interface | no | no | With Parallel，9unit | |
| Input | Input Sources | L + N + PE | ||
| Rated Input Voltage | 208 / 220 / 230 / 240VAC | |||
| Voltage Range | 154-264VAC ± 3 ( APP Mode ) 185-264VAC ± 3V ( UPS Mode ) | |||
| Freqency | 50HZ / 60HZ ( Auto Adaptive ) | |||
| Output | Rated Capacity | 3000W | 5000W | 5000W |
| Output Voltage | 208 / 220 / 230 / 240VAC ± 5 % | |||
| Output Frequency | 50 / 60HZ ± 0.1 % | |||
| WaveformT | Pure Sine Wave | |||
| ransfer Time( adjustable ) | Computers ( UPS Mode ) 10ms Appliance ( APP Mode ) 20ms | |||
| Peak Power | 6000VA | 10000VA | 10000VA | |
| Over Load Ability | Battery Mode | |||
| 1min @ 102 % -110 % Load | ||||
| 10s @ 110 % -130 % Load | ||||
| 3s @ 130 % -150 % Load | ||||
| 200ms @ > 150 % Load | ||||
| Peak Efficiency(battery Mode) | > 94% | > 94% | > 94% | |
| Battery | Battery Votage | 24vdc | 48vdc | 48vdc |
| Constant Charging Voltage(Adjustable) | 28. 2vdc | 56.4vdc | 56.4vdc | |
| Floate ChargingVoltage(Adjustable) | 27vdc | 54vdc | 54vdc | |
| Chargers | PV Charging Mode | MPPT | MPPT | MPPT |
| MAX.PV Input Power | 1500W | 5500W | 5500W | |
| MPPT Tracking range | 30-115vdc | 120-430vdc | 120-430vdc | |
| MAX.PV Input Voltage | 145vdc | 450vdc | 450vdc | |
| Best open circuit voltage range | 70-110V | 370-430V | 370-430V | |
| Best voltage | 60-90V | 300-340V | 300-340V | |
| MAX.PV Charging Current | 60A | 80A | 80A | |
| MAX.AC Charging Current | 60A | 80A | 80A | |
| MAX.Charging Current | 120A | 80A | 80A | |
| Display | LCD Display | Display Running Mode / Loads / Input / Output etc | ||
| Interface | RS232 | 5PIN/Pitch2.0mm Baud rate 2400 | ||
| Communication Port | 2X5PIN / Pitch2.54mm Lithium Lattery BMS Communication CardWificard Dry Contact | |||
| Physical | Size(mm) | 102*305*465 | ||
| Package weight（kg） | 8.5 | 10 | ||
| Environments | Operating Temperature | 0 ~ 40℃ | ||
| Humidity | 20 % ~ 95 % ( non-condensing ) | |||
| Storage Temperature | -15~60℃ | |||
| Altitude | Altiude Not Over 1000m Derating over 1000m Max 4000m Refer to IEC62040 | |||
| Noise | ≤ 50db | |||
Solar + Energy Storage: Unleash Your Power Freedom!
Fill out the form to get:
- Free System Design & Proposal
- Accurate ROI & Investment Analysis
- Lifetime Technical Support Commitment
- Exclusive Offers & Member Benefits
What can the ISPS series products do for you
Energy storage system
Providing Emergency Backup Power: The peak-shaving and valley-filling mechanism can discharge stored energy during off-peak hours, offering emergency backup power to address unexpected events and safeguard the secure and stable operation of the power grid.
Enhancing the Utilization of Fluctuating Renewable Energies: Energy storage systems can harness renewable energies such as wind and solar to charge batteries during periods of low grid demand. Conversely, during peak demand, the stored chemical energy in the batteries is converted back into electrical energy for discharge. This process significantly improves the utilization rate of intermittent renewable energy sources, ensuring a more efficient integration with the power grid.
Other Product
know more about case
