8-12kw Low frequency solar inverter with mppt

IMHGC series
Power frequency inverter control integrated machine, built-in MPPT controller, 3 times the maximum peak power, optional single-phase 120V or 220V output, can choose split-phase 120V and 220V output. Ideal for home use on two circuits for power tools, computers, audio/video components, and other sensitive electronic equipment. This inverter has a hard shell and is not limited to home, commercial, industrial, marine and other scenarios.
  1. Sine wave output
  2. Split-phase output 120V/240V (optional)
  3. real power output
  4. Built-in MPPT control, maximum photovoltaic input 450V
  5. Built-in AC charger, the maximum charging current can reach 60A
  6. Support external WIFI module
  7. 2 years warranty

Low frequency solar inverter Detail

MODEL 8kw 10KW 12KW
Continuous Output Power (W) 8000W 10000W 12000W
Rated input voltage 48VDC
Mains mode specifications:
Input voltage waveform Sine wave (mains or generator)
Rated input voltage 100V/110V/120V/220V/230V/240Vac
Low voltage    shutdown point 92/184Vac±4%
Low pressure    recovery point 97/194Vac ±4%
High voltage   shutdown point 127/253Vac±4%
High pressure   recovery point 121/243Vac±4%
Maximum AC input voltage 135/270V rms
Rated input frequency 50Hz/ 60Hz  (automatic detection)
Low voltage recovery point frequency 40.5+0.3Hz ;
Low voltage cut-off  point frequency 40+0.3Hz;
High voltage recovery point frequency 69.5+0.3Hz;
High voltage cut-off  point frequency 70+0.3Hz ;
Output voltage waveform Consistent with the input voltage waveform
Overload protection Circuit breaker start
Short circuit protection Circuit breaker start
Power Efficiency >95%
Conversion current 30A
Conversion time      (Ac to Dc) 10ms
Bypass switching current Yes
Bypass maximum    load current 30A
Output voltage waveform Sine wave
Power factor 0~1.0
Rated output voltage (V) 120/230Vac
Rated output   frequency (Hz) 60/50Hz ± 0.3Hz
Automatic tracking  main frequency (Hz) Yes (from the first connection)
Output voltage range ±2% rms
efficient >80%
Overload protection (SMPS load) (110%<load<125%) ±10%: disconnect the output voltage after 15 minutes
(125%<load <150%) ±10%: disconnect the output voltage after 10 seconds
Load >150% ±10%: Disconnect the output voltage after 20 seconds
Peak capacity(10s) 24000VA 30000VA 36000VA
start the motor 8HP 10HP 12HP
Short circuit protection Current limit (power off after 10s)
Circuit breaker size 63A
Rated DC input voltage 48VDC
Power saving load ≦2W
Inverter dimensions(Length*width*height) 698*415*200mm
Packing size (length*width*height) 850*520*310mm
Inverter weight 60+3 66+3 70+3
Packing operating weight 62+3 68+3 72+3
Standard warranty 2 year

Solar + Energy Storage: Unleash Your Power Freedom!

Fill out the form to get:

  1. Free System Design & Proposal
  2. Accurate ROI & Investment Analysis
  3. Lifetime Technical Support Commitment
  4. Exclusive Offers & Member Benefits

What can the ISPS series products do for you

Energy storage system

Providing Emergency Backup Power: The peak-shaving and valley-filling mechanism can discharge stored energy during off-peak hours, offering emergency backup power to address unexpected events and safeguard the secure and stable operation of the power grid.

Enhancing the Utilization of Fluctuating Renewable Energies: Energy storage systems can harness renewable energies such as wind and solar to charge batteries during periods of low grid demand. Conversely, during peak demand, the stored chemical energy in the batteries is converted back into electrical energy for discharge. This process significantly improves the utilization rate of intermittent renewable energy sources, ensuring a more efficient integration with the power grid.

Other Product

know more about case